Drive Is Locked Unlock and Try Again
Scenario
"I found today that my Windows 10 PC shutdowned because of power consequence and later on turning of I received repair screen. I'grand unable to repair information technology and so far. I tried to update BIOS, disconnect disks, boot from install CD and repair system but I received mistake that disk is locked. I tried to unlock deejay via command line just with no luck. Is there any other choice except reinstall of the Windows and restore from backup?"
Many users would meet "The drive where Windows is installed is locked" mistake in dissimilar situations. What may cause the error? How to fix it?
Causes of the error
The mistake may occur due to more than than one reason. Hither nosotros listing the common reasons that may cause the mistake:
1. Bitlocker kicking agent disabled. If the Bitlocker agent is disabled or overwritten, this error message may appear.
two. The TPM (Trusted Platform Module) has been cleared or reset. If the TPM is cleared or lost, the keys the TPM contains may exist cleared and the system will fail to kick.
3. BCD (Boot Configuration Data) file is damaged. The BCD file contains boot configuration parameters for Windows system. If the BCD file is damaged, you may get the error on Startup.
...
There are many other reasons would cause "the drive where Windows is installed is locked" error. Mayhap it is due to any malware or 3rd-party software conflict that has corrupted the system files, or it may be an internal hardware failure. No affair what crusade the error occur, here yous can solve it with the post-obit methods.
How to fix "The drive where Windows is installed is locked" on Windows 10/viii/7?
Here provides you lot effective ways to unlock hard drive on Windows 10/viii/seven so that you can overcome the trouble "The drive where Windows is installed is locked".
Method i. Run Automated Repair
Automatic Repair utility is available in Windows viii and Windows x. The drive where Windows is installed is locked error may be fixed by this utility.
1. Insert the Windows DVD/USB and reboot the system from the Windows DVD/USB.
2. When yous get into the Windows install window, click Repair your calculator.
3. Then, navigate to Troubleshoot -> Automatic Repair and continue with the wizard to consummate the process for fixing the problem.
It may ready the fault successfully. However, it may fail to gear up the error. If it didn't fix the fault, you lot can do as the next method.
Method ii. Check disk for errors
As "The drive where Windows is installed is locked" error may be caused by hardware failure, you demand to check disk for errors. The CHKDSK.exe utility will assist you bank check disk for errors and fix it.
one. Restart the computer from Windows installation DVD/USB.
2. In the Windows install window, click Repair your computer.
3. Then, y'all should click Troubleshoot -> Advanced options -> Command Prompt.
4. In the command prompt, type the command: chkdsk C: /f /10 /f
This command will help you lot check and fix errors on the system division. If there is no problem with organization partition, you can try Method 3.
Method iii. Rebuild BCD file
BCD file damage or corruption may also cause the fault "The drive where Windows is installed is locked". if so, you tin utilize bootrec to rebuild the BCD file.
To rebuild BCD, you can follow the steps:
i. Insert the installation disc and boot from information technology.
2. At the install screen, click Repair your reckoner.
three. Click Troubleshoot -> Advanced Options -> Command Prompt.
iv. In the command prompt, type the following commands:
bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd
Each functioning should be executed by pressing Enter key. After that, remove the installation disc and restart computer to run into if the problem is solved.
The iii methods all need to use Windows installation DVD/USB to reboot computer. What if you do not have a Windows installation disc? Thus, you can plow to a free third party software, AOMEI Division Banana Standard for assistance.
Method 4. Using AOMEI Partition Assistant to check disk or rebuild MBR
AOMEI Partition Assistant is a free partition managing director that can provide some help for fixing error "The drive where Windows is installed is locked".
Free download AOMEI Partition Assistant. Windows x/8/7 is supported.
one. Make bootable media
If y'all do non have Windows kicking disc, you tin utilise AOMEI Partition Assistant to create a bootable media with a USB drive or other drives. Do every bit following steps:
Step 1. Connect the USB drive to a normal Windows PC. Install and launch AOMEI Segmentation Banana. To make bootable media, here y'all need to click Brand Bootable Media nether Wizards column. It will bring you into the wizard, click Next.
Step 2. Here y'all can select a mode to make the desired bootable media. Here nosotros choose to create a bootable USB drive. Click Proceed.
The process will format the USB drive. If there is any important information on the USB drive and you do not desire to lose the data, you should backup files on USB drive in advanced.
When the task finished, you have already created a bootable USB drive.
two. Using AOMEI Sectionalisation Assistant to check disk error and rebuild MBR
After created bootable USB drive with AOMEI Division Assistant, y'all can utilise it to boot the calculator which has the error "the drive where Windows is installed is locked", and effort to fix the error past disk checking or rebuild MBR.
Pace i. Insert the bootable USB bulldoze y'all created before to your PC, and boot from it. You may get into BIOS to change the boot order.
Step two. It will get into AOMEI Partition Banana's main interface directly. To check disk fault, you can right-click the organization disk, select Surface Test.
Stride 3. Cheque the option of Quick Check, and click Start to run the plan.
* If in that location are errors on the disk, it will remind you to set up errors.
* If there is no trouble with disk, yous can endeavor Rebuild MBR as the following steps:
Step 1. Correct-click the arrangement disk, select Rebuild MBR in the pop-upward menu.
Step 2. Set the type of MBR for the electric current Bone, click OK.
Step 3. Finally, click Apply to submit the whole operations.
Note:
The AOMEI Sectionalisation Assistant Standard is only free for Windows PC users. If you lot are Windows Server users, such as Server 2003, 2008, 2012, 2016, 2019, you lot should use AOMEI Partition Assistant Server Edition.
Source: https://www.diskpart.com/articles/the-drive-where-windows-is-installed-is-locked-4125.html
0 Response to "Drive Is Locked Unlock and Try Again"
Post a Comment